Knifestock - HSS
Centric superior quality corrugated knifestock for every application
Centric HSS Corrugated Knifestock:
 Premium M2: | Our most popular HSS M2, horizontally ground which ensures bar to bar consistency, quality and hardness. Strict tolerance kept on all dimensions. Perfect for jointing |
 Standard M2: | High quality, competitively priced, horizontally ground, German base metal |
 T1: | 18% Tungsten, true T1, longer run time, German base metal |
 BlackBack: | Economy grade opti-steel, black oxide coated for improved life & reduced pitch build-up |
 M3: | European-Style back bevel, horizontally ground |
 M42: | Wafer inlay of higher cobalt & tungsten M42 steel, 65-67 Rockwell C hardness |
 DiamondBack: | Premium HSS M2 with a diamond enhanced process for difficult applications such as mineral content, glue lines, and long runs in hardwoods. Leaves less-pronounced knife mark finish. Perfect for jointing. Grinds like M2 with a regular vitrified grinding wheel. Debur only with CMS rubber stick. |
Centric supior quality corrugated knifestock for every applications.
| 5/16" Thickness |
|---|
| 1" x 5/16" x 25" (filler stock) |
| 1.25" x 5/16" x 25" |
| 1.50" x 5/16" x 25" |
| 1.75" x 5/16" x 25" |
| 2.00" x 5/16" x 25" |
| 2.25" x 5/16" x 25" |
| 2.375" x 5/16" x 25" |
| 2.50" x 5/16" x 25" |
| 2.75" x 5/16" x 25" |
| 3.00" x 5/16" x 25" |
| 3.25" x 5/16" x 25" |
| 3.50" x 5/16" x 25" |
| 1/4" Thickness |
|---|
| 1" x 1/4" x 25" (filler stock) |
| 1.25" x 1/4" x 25" |
| 1.50" x 1/4" x 25" |
| 1.75" x 1/4" x 25" |
| 2.00" x 1/4" x 25" |
| 2.25" x 1/4" x 25" |
| 2.375" x 1/4" x 25" |
| 2.50" x 1/4" x 25" |
Centric knife stock can be used with our own corrugated cutter heads or in any similar wood moulder application. Customers with Weinig, Diehl, Wadkin, Leadermac, SCM moulders choose to run Centric high speed steel knives for the consistent quality and value.
Economy M2 HSS Planer Knives:
- Smooth, non-corrugated knives for planers
- M2 grade high speed steel
- Choose 1/8" or 5/32" thickness
- 1-1/2" , 1-3/4", or 2" knife widths
- Cut to any length and sold by the inch
Premium M2 HSS Planer Knives (Made in the USA):
- Smooth, non-corrugated knives for planers
- Top-tier M2 grade high speed steel ensures consistency every time
- Choose 1/8" or 5/32" thickness
- Standard 35 deg bevel unless otherwise noted
- Additional knife width size options compared to ecomonmy planer knives
Williams & Hussey® M2 Knives:
- Smooth or corrugated knives available
- 25" bar lengths, with standard Williams & Hussey hole pattern
- Knife widths from 1-3/4" up to 2-1/2"
- 3/16" thickness or 1/4" thickness
HSS Bevel Edge Shaper Steel (with Lock Edge):
- Special lock-edge design on one side of knife
- Choose from either M2 or AKM knife steel
- 25" bar lengths
- 1/4" thickness or 5/16" thickness
- Knife widths from 3/4" up to 3-1/4"
(sizes under 1" width are not able to notch for lock edge)
Contact Us
If you have questions, suggestions or concerns, please feel free to contact us anytime or stop by and visit with us. No inquiry is too small. We look forward to hearing from you.
If you would like to speak with someone:
Phone: (800) 926-3548
Or fill out the form below and a representative will contact you.
Our Location
Centric, Inc.8450 Highland Dr
Wausau, WI 54401
Ph: (800) 926-3548
Fax: 715-848-3371
[email protected]
** Prices subject to change, please contact us to confirm